ASC Digital Tool Library
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
  • Fig-188R
Service:
  • Hanger and surge restraint for horizontal CPVC, steel, and copper piping when installed on the top, bottom, and side of the supporting structure.
  • Guide for vertical CPVC, steel, and copper piping when installed on the side of the supporting structure.
  • Horizontal and vertical seismic restraint per NFPA 13-2016 requirements.
  • May be installed with concrete, steel structural members, and other structural members with fasteners which comply with the requirements of NFPA 13.
Patents: No. 6,648,278
Installation:
  • Snap hanger over pipe. If needed, squeeze strap back around pipe.
  • CPVC pipe must be allowed to slide freely through the Fig. 188R.
  • Secure hanger to mounting surface with screws provided or with listed fasteners.
Features:
  • Beveled edge design helps protect the CPVC pipe from any rough surface and eliminates pipe abrasion.
  • Easily attaches to wood structure with #10 x 1" hex washer head self-threading screw supplied with product. No pre-drilling required.
  • Bottom of pipe is offset 1 1/2" from the structure. Eliminates wooden spacer blocks.
Ordering: Specify CPVC pipe size, figure number and description.
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items Add to CAD Cart

Item #

CAD

Pipe Size

Max. Hanger Spacing

Weight

N/A N/A 3/4 in N/A 5 1/2 ft N/A 0.13 lb
N/A N/A 1 in N/A 6 ft N/A 0.14 lb
N/A N/A 1-1/4 in N/A 6 1/2 ft N/A 0.15 lb
N/A N/A 1-1/2 in N/A 7 ft N/A 0.17 lb
N/A N/A 2 in N/A 8 ft N/A 0.19 lb
1 - 5 of 5 | Results Per Page | View | Unit of Measure
1