ASC Engineered Solutions

ASC Engineered Solutions


Connect With Us
U.S: 800-301-2701
International: +31-53-572-5570
Canada: 800-661-8998
Latin America: 708-534-1414
Email: marketing@asc-es.com
Print Back
Hanger Service: Swivel hanger designed to support horizontal piping from angled structures. Listed for installation at angles between 0 and 90 degrees.
Restraint Service: May be installed as a branch line restraint per the requirements of NFPA 13. The AF777 may be installed directly to the structure or to the Fig. AF779.
Installation:
  • Install mounting bolt into structure or structural attachment and tighten hex nut until the yoke (U-Shaped Bracket) is tight against the structure or attachment.
  • Thread the hanger rod or restraint rod into the hex union until it bottoms. Back rod off a maximum of one turn to allow the hex union to swivel freely.
  • Adjust angle as necessary.
  • If the AF777 is exposed to vibration from the piping system or the structure, jam nuts may be installed on the mounting bolt and the threaded rod.
  • Fire Protection applications shall also be installed per NFPA 13 requirements.
Features: Full 90 degree rotation allows for installation at any angle.
Ordering: Specify figure number, finish, size, and description.
Unit of Measure

Specifications

Industry Standards/Certifications

 N/A cULus Listed

Type

 N/A Swivel Attachment

Material

 N/A Carbon Steel

Rod Size

 N/A 3/8

UL Max Hanger Load

 N/A Up to 4" Pipe

UL Max Seismic Restraint Load

 N/A 1,000 lb

Max Hanger Load

 N/A 250 lb

Product Number

 N/A 0500610753

UPC Code

 N/A 69029112265

HPH Code

 N/A 034GR4799C

Weight

 N/A 0.19 lb