ASC Digital Tool Library
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
The Fig. 70G Butterfly Valve is designed for use with Anvil Gruvlok couplings for fast and easy installation on grooved pipe. The valve body is fully rubber lined in EPDM or Nitrile material. A 316 Stainless Steel Disc is standard. The valve is supplied with a two position lockable handle.
Grooved ends conform to the requirements of AWWA C606.
Not intended for use in potable water systems.
The valve must not be installed with the disc in the fully open position. The disc must be partially closed so that no part is protruding past the end of the valve body during installation.
Request Information Add to CAD Cart
Unit of Measure
Items
fig_70G

70G 2 DI GR BFV 316 DISC E SEAL
fig_70G

70G 2 DI GR BFV 316DISC T SEAL
fig_70G

70G 3 DI GR BFV 316DISC E SEAL
fig_70G

70G 3 DI GR BFV 316DISC T SEAL
fig_70G

70G 4 DI GR BFV 316DISC E SEAL
Type N/A Butterfly Valve
Style N/A Grooved
Valve Size N/A 2 in N/A 2 in N/A 3 in N/A 3 in N/A 4 in
Body Material N/A Carbon steel, elastomer lined
Housing Material N/A Ductile iron conforming to ASTM A 536, Grade 65-45-12, painted.
Body Lining Material N/A Grade E (EPDM)
Recommended for water service, dilute acids, alkaline, oil-free air and many chemical services.
NOT FOR USE IN PETROLEUM SERVICES. 		N/A Grade T (Nitrile)
Recommended for petroleum products, air with oil vapors, vegetable oils and mineral oils.
NOT FOR USE IN HOT WATER SERVICES.
 		N/A Grade E (EPDM)
Recommended for water service, dilute acids, alkaline, oil-free air and many chemical services.
NOT FOR USE IN PETROLEUM SERVICES. 		N/A Grade T (Nitrile)
Recommended for petroleum products, air with oil vapors, vegetable oils and mineral oils.
NOT FOR USE IN HOT WATER SERVICES.
 		N/A Grade E (EPDM)
Recommended for water service, dilute acids, alkaline, oil-free air and many chemical services.
NOT FOR USE IN PETROLEUM SERVICES.
Upper & Lower Shafts Material N/A 416 Stainless Steel
Disc Material N/A 316 Stainless Steel
Housing Bolts & Nuts Material N/A Heat treated, oval-neck track head bolts conforming to ASTM A-183 Grade 2 with a minimum tensile strength of 110,000 psi and heavy hex nuts of carbon steel conforming to ASTM A-563 Grade A or Grade B, or SAE J995 Grade 2. Bolts and nuts are provided zinc electroplated.
Min. Temperature N/A -40 ºF N/A -20 ºF N/A -40 ºF N/A -20 ºF N/A -40 ºF
Max. Temperature N/A 230 ºF N/A 180 ºF N/A 230 ºF N/A 180 ºF N/A 230 ºF
Max. Pressure N/A 200 psi
Cv Coefficient N/A 74 N/A 74 N/A 173 N/A 173 N/A 829
Anvil Product Number N/A 0387002405 N/A 0387002504 N/A 0387002421 N/A 0387002520 N/A 0387002447
UPC Code N/A 66242801367 N/A 66242801373 N/A 66242801368 N/A 66242801375 N/A 66242801369
HPH Code N/A
Weight N/A 3.5 lb N/A 3.5 lb N/A 7.00 lb N/A 7.00 lb N/A 12 lb