6D long radius elbows are available in sizes up to 24". Sizes 4" and below are provided with a 4" (101.6 mm) long integral tangent. Remaining sizes are provided with integral tangents with lengths equal to the nominal pipe size.
Grooved or plain-end available.
Material: standard wall steel pipe to ASTM A 53, Grade B. (Other materials available on request).
Bends to conform to above radii.
C to E tolerances: 2" through 6" ± 1/8" (3.2 mm); 8" through 16" ± 1/4" (6.4 mm); 18" through 24" + 3/8" (9.5 mm).
All weights are approximate, based on calculated weight of pipe.
Unit of Measure
Specifications
Industry Standards/Certifications
N/ANSF-61 and Low Lead Approved. cULus Listed. FM Approved.
Type
N/AElbows
Style
N/ALong Radius
Nominal Size
N/A10 in
Body Material
N/ACarbon steel to ASTM A 53, Grade B.
Coatings
N/AHot Dipped Zinc Galvanized conforming to ASTM A 153
